Key Products
Featured Products
Product Line
- Absorptive Quilted Curtains
- Acoustical Foam Panels
- Acoustik Underlayment
- Acoustic Windows
- Adjustable Jamb Seals
- Barrier – Decoupler
- Barrier ACT Ceiling Tiles
- Barrier-Backed Ceiling Tiles
- CFAB Cellulose Panels
- Climate Seal Window Inserts
- Cotton Soundwave Eggcrate Panels
- Curve Panels
- dBa Ceiling Ceiling Tiles
- Duracoustic
- Echo Eliminator Baffles
- Exterior Quilted Barrier/Absorbers
- Glasswool Ceiling Tiles
- Green Glue Damping Compound
- Heavy Duty Door Seal Kits
- Magnetic Astragal
- Melamine Composite Panels
- Painted Nubby Fiberglass Tiles
- PVC and Sailcloth Baffles
- Pyramid Diffuser
- Quiet Floor NP
- Quiet Floor Walk
- Quilted Exterior Absorbers
- RSIC-1 Clips
- RSIC-1 Ext04 Clips
- Rubber Isolation Hangers
- Sonex One
- Sound Silencer Baffles
- Sound Silencer™ Ceiling Tiles
- Spring Isolation Hangers
- Spring Isolation Mounts
- Squareline Ceiling Tiles
- Standard Door Seal Kits
- Stud Isolators
- Studio 3D Doors
- Studio Windows
- Super W Pads
- Tecsound Acoustic Membrane
- Ultra Touch Insulation
- Whisper Wave Clouds
Noise S.T.O.P. FABRISORB™
Decorative Fabric Wrapped Custom Acoustical Wall Panels
High Performance
Architecturally Decorative
Custom Engineered & Manufactured
Reduced Noise & Reverberation
100% Custom Colors and Sizes
Fabric Wrapped Panel Installation Tutorial
Note: If using E.C. clips to mount these fabric wrapped acoustical panels to the ceiling, the installer must use construction adhesive on each clip so the clips do not slide apart. It is also advised to toe-nail the acoustic wall tile into place, or use trim around the perimeter to make sure that the clips adhere together correctly.
Product Photos
| Material | 6 lb. density glass fiber with woven fabric and micro-perforated vinyl facings. |
|---|---|
| Pattern | Flat-faced with square or radiused corners, beveled, radiused or mitered edges. |
| Features | Custom designed and manufactured to meet every need. Soft or hard edges. |
| Applications | These decorative sound absorbing panels are great for offices, schools, meeting rooms, music rooms, hotels, auditoriums, recording studios, broadcasting studios. Any space where good speech privacy or speech intelligibility is important. |
| Thickness | 1″, 1-1/8″, 2″, 2-1/8″. |
| Sizes | Custom Up to 4′ × 10′. |
| Colors | A wide range of standard colors and custom colors are available for woven fabrics and perforated vinyls. |
| Flammability | ASTM E84, Class A. Flame Spread: 15; Smoke Developed: 40. |
| Installation | Adhesive, Hook & Loop Fasteners, Mechanical Clips, Impaling Clips, magnetic clips. |
High performance absorption
Absorptive in high traffic areas
For combined use in Studios for absorption and reflection
Multi-purpose panel for absorption and sound blocking
For gymnasiums, absorption and abuse resistance
For long lasting and effective tackability
High absorption and tackability
Tackability where sound absorption is not necessary
Barricade vinyl barrier, ideal for areas requiring high STC
Fabrisorb™ Wall panel – Sound Absorption Coefficients |
|||||||
|---|---|---|---|---|---|---|---|
| 6-7 PCF Glass Fiber | 125Hz | 250Hz | 500Hz | 1KHz | 2KHz | 4KHz | NRC |
| 1″ | .14 | .27 | .80 | 1.11 | 1.14 | 1.14 | .85 |
| 2″ | .22 | .81 | 1.24 | 1.30 | 1.21 | 1.16 | 1.15 |
Edge Details
| Impaling Clips and Adhesive | ||
|---|---|---|
| One impaling clip is needed for each mounting locationImpaling clips are installed onto the wall to support the weight of the panels until a construction adhesive dries. | ||
 |
||
| Install Location | Wall | |
| Parts Included | (1) × Impaling Clip | |
| Recommended Adhesive
(sold separately) |
Titebond Green Choice Adhesive (ASTSA28) | |
| Part Number | HWIMP33 | |
| Fabric Wrapped Panel Hardware Pack – Impaling Clip | ||
|---|---|---|
| One hardware pack is needed for each mounting locationDrywall anchors are installed into the drywall and the screws hold the impaling clip to the anchor. Impaling clips are installed onto the wall to support the weight of the panels until a construction adhesive dries. | ||
 |
||
| Install Location | Wall | |
| Parts Included | (1) × Impaling Clip
(2) × Drywall Anchors (2) × ¾″ Screws |
|
| Recommended Adhesive
(sold separately) |
Titebond Green Choice Adhesive (ASTSA28) | |
| Part Number | HWFWPIMP | |
| Fabric Wrapped Panel Hardware Pack 1 | ||
|---|---|---|
| One hardware pack is needed for each mounting locationThe drywall anchors are installed onto the drywall and the screws hold one of the plastic clips to the wall. The remaining ¾″ screws are used to mount the remaining plastic clip to the mounting plate on the back of the panel. Adhesive can be used to hold the clips together to prevent the clips from detaching from one another. | ||
 |
||
| Install Location | Wall or Ceiling | |
| Parts Included | (1) × Mounting Plate (factory-installed on the back of the panel)
(2) × 3″ Plastic Z-bars (2) × Drywall Anchors (4) × ¾″ Screws |
|
| Part Number | HWFWPHP1 | |
| Note | Plastic clips are also available in 21″, 47″, and 96″ lengths. | |
| Fabric Wrapped Panel Rotofast Standard Anchor Kit | ||
|---|---|---|
| One hardware pack is needed for each mounting location. The Rotofast Standard Anchor is screwed to the wall. Mark anchor locations on panel. Push metal insert into anchor body. Position panel at pre-marked locations and push hex tool through panel face to engage anchor. Turn clockwise approximately two revolutions. Pull the driver out.For panels with tightly-woven fabric, leather, vinyl, or other specialty covering, the Rotofast Snap-On Anchor is recommended. | ||
 |
||
| Install Location | Wall | |
| Parts Included | (1) × Rotofast standard anchor
(1) × Wall anchor (1) × 2″ #8 Screw (1) Rotofast standard hex tool (1) Rotofast standard driver tool |
|
| Note | Multiple kits ordered together will only include (1) Rotofast standard hex tool and (1) Rotofast standard driver tool. | |
| Fabric Wrapped Panel Rotofast Snap-On Anchor Kit | ||
|---|---|---|
| One hardware pack is needed for each mounting location. The Rotofast Snap-On Anchor is screwed into the back of the panel. The marking plug is inserted into the anchor, then panel is pushed against wall to mark anchor locations. The ratchet is screwed into the wall at marked locations. Firmly push panels onto ratchets to complete installation. | ||
 |
||
| Install Location | Wall or Ceiling | |
| Parts Included | (1) × Rotofast snap-on anchor with ratchet
(1) × Marking plug (1) × Wall anchor (1) × 2″ #8 Screw (1) Rotofast Snap-On Hex Tool |
|
| Note | Multiple kits ordered together will only include (1) Rotofast Snap-On Hex Tool and up to (6) Marking plugs. | |
Our Products
Key Products
Featured Products
Product Line
- Absorptive Quilted Curtains
- Acoustical Foam Panels
- Acoustik Underlayment
- Acoustic Windows
- Adjustable Jamb Seals
- Barrier – Decoupler
- Barrier ACT Ceiling Tiles
- Barrier-Backed Ceiling Tiles
- CFAB Cellulose Panels
- Climate Seal Window Inserts
- Cotton Soundwave Eggcrate Panels
- Curve Panels
- dBa Ceiling Ceiling Tiles
- Duracoustic
- Echo Eliminator Baffles
- Exterior Quilted Barrier/Absorbers
- Glasswool Ceiling Tiles
- Green Glue Damping Compound
- Heavy Duty Door Seal Kits
- Magnetic Astragal
- Melamine Composite Panels
- Painted Nubby Fiberglass Tiles
- PVC and Sailcloth Baffles
- Pyramid Diffuser
- Quiet Floor NP
- Quiet Floor Walk
- Quilted Exterior Absorbers
- RSIC-1 Clips
- RSIC-1 Ext04 Clips
- Rubber Isolation Hangers
- Sonex One
- Sound Silencer Baffles
- Sound Silencer™ Ceiling Tiles
- Spring Isolation Hangers
- Spring Isolation Mounts
- Squareline Ceiling Tiles
- Standard Door Seal Kits
- Stud Isolators
- Studio 3D Doors
- Studio Windows
- Super W Pads
- Tecsound Acoustic Membrane
- Ultra Touch Insulation
- Whisper Wave Clouds
