AcoustiSeal™ Acoustical Sealant

Instructions

When using AcoustiSeal™ acoustical caulk soundproofing sealant, the goal is to create a completely sealed room. Think of the room you are sealing as a water tank.

1. Make sure the surfaces that are to be sealed are clean.
2. Cut the nozzle to create an appropriately sized hole.
3. The image below shows three possible AcoustiSeal™ applications. Image “A” shows sealant under one layer of drywall on both sides. Image “B” is the same as “A” with the addition of a bead under the plate resulting in a better seal. Image “C” shows a multiple drywall layer install with beads under each layer and a heavy bead under the plate. This would yield an excellent seal.

1. Allow to dry typically 48 hours before painting.
2. Drywall mud can be applied directly over AcoustiSeal™.
3. Clean up with soap and water while still wet.

First Aid

Keep this acoustical caulk soundproofing sealant out of reach of children. Wear eye protection.
Skin Contact: Wash affected area thoroughly with soap and water.
Eye Contact: Flush thoroughly with water and obtain medical attention.
Inhalation: Remove to fresh air.
Seek medical attention if swallowed.